UK Moths

How to Build Your Own Moth Trap

Build a simple moth trap from a bucket, funnel and light, with safety tips, the best nights to run it, and how to release moths gently afterwards.

On this page
  1. Why build a moth trap?
  2. Choosing a design
  3. What you need
  4. Building the bucket trap
  5. Safety first
  6. When and where to run it
  7. Handling and releasing moths
  8. Light-free options
  9. Common mistakes

Why build a moth trap?

A moth trap draws moths to a light so you can look at them closely. It lets you see species you would rarely find in the open, and it gives you a way to record what flies in your area. A well-run trap harms very few moths. You do not need to kill a moth to identify it. Most people look at the catch, take a photo, and then let the moths go.

Choosing a design

Several designs are popular with moth recorders:

  • Robinson trap: a powerful design that often gives the highest catches. It uses a mercury vapour (MV) lamp that needs mains power.
  • Skinner trap: a box design that folds flat for carrying.
  • Heath trap: a compact design with an actinic light.

For a first trap, a simple bucket design is cheapest and is easy to make from household items.

What you need

  • A bucket of about 20 to 30 litres, with a lid
  • A funnel that fits a hole in the lid
  • Two clear vanes, about 20 to 30 cm tall, made of clear acrylic or corrugated plastic and slotted together in an X
  • Egg boxes, for moths to rest in
  • A light. An actinic tube of 15 to 20 W is a good choice for gardens. A UV LED, at about 365 to 395 nm, is another option. MV lamps are powerful but need a ballast, and supply is shrinking as mercury rules tighten. LEDs are the future-proof option, although availability varies
  • A rain guard for the light

Building the bucket trap

  1. Fill the bucket. Stack egg boxes in the bottom so that moths that fall in have somewhere to rest.
  2. Cut the lid. Trace the wide end of the funnel onto the lid and cut a hole slightly smaller than the circle.
  3. Trim the funnel. Cut off the narrow spout so the opening is about 4 to 5 cm across. Designs vary. The opening should be wide enough for moths to drop through but hard for them to fly back out. Push the funnel into the lid.
  4. Fit the vanes. Stand the two vanes in an X above the funnel. Moths flying toward the light hit the vanes and drop into the funnel.
  5. Hang the light. Mount the light above the funnel, protected from rain, with a rain guard over it.

Safety first

Take the following precautions before you switch on:

  • Do not stare at a UV or MV bulb. Both can harm your eyes.
  • MV bulbs get very hot and contain mercury. Dispose of them as hazardous waste.
  • Use outdoor-rated cables, and plug the trap into a supply protected by a residual current device (RCD).
  • Fit a rain guard. Rain can shatter a hot MV bulb.

When and where to run it

Switch the light on at dusk and empty the trap at dawn, before birds arrive. The best nights are warm (above about 10°C), humid, overcast and still, with little moon. Choose a different spot each time, and do not trap the same place every night.

Handling and releasing moths

Look at the catch in the morning, ideally while the moths are still resting in the egg boxes. Move moths with a soft brush or a small pot rather than your fingers. If you want to identify them later, take a photo first. Release the moths into dense cover, spread out, away from the trap.

Light-free options

If you do not want to use a light, you can try a few other methods:

  • A white sheet: on its own it draws few moths, so it is usually lit by a lamp, and moths land on it so you can look at them. Note that the sheet is a surface to collect resting moths, not a light source.
  • Sugaring: painting a mixture of treacle, sugar and beer on tree trunks draws moths that feed on sugary liquids at night.
  • Wine ropes: ropes soaked in a sweet mixture work in a similar way.

Common mistakes

Brighter is not always better. Actinic or LED lights suit gardens better than very powerful lamps. A trap that is well run and emptied on time harms very few moths. For more on why moths come to light, read why are moths attracted to light? To identify what you catch, use the UK moth identification chart.

The complete guide to uk moths

UK Moth Identification: A Chart of Common British Moths
Read the guide

Keep exploring

Guides from other topics

All topics →